اخلاء مسؤولية | DISCLAIMER
حل مشكلة الشحن والشحن الوهمي واليو اس بي سامسونج اس ثري ميني
Samsung GT-I8190 Charging Solution Problem Jumper
 |
تم تصغير هذه الصورة. اضغط هنا لمشاهدة الحجم الكامل. أبعاد الصورة الاصلي هو 1280*960. |
Samsung GT-I8190 Charging Jumper Ways
Samsung I8190 Not Charging Problem SolutionCharging problem in Samsung galaxy S3 Mini GT-I8190 is really not a common one, but when it happens you really know that you are going to have a very bad time! Charging problem can occur due to any of the reasons, it could either be due to water damage or physical damage.
In the following lines you will get to know simple and effective troubleshooting methods to overcome Samsung GT-I8190 Charging problems.
Problems
Phone no Charging.
Auto Charging.
Showing “PC connection” error message.
Phone heats up during charging.
Manual Solution
Check with any other original Samsung charger.
Clean Charging connectors and check
Tools Required
Following are the tools you need before you plan to go with hardware method
Soldering Gun.
Heat Gun.
Multi meter.
Plastic separation tool.
Plus screw driver.
Jumper Wire (Copper wire).
Samsung S3 Mini GT-I8190 Charging Hardware Solution
OR
Check, clean or replace the charging pin connector (DC jack). clean also the PCB pads.
Check/replace the Charging connector.
Check the charging voltage (VCHARGE).
Check the below image for Charging Ways.
If any Track ways is missing just apply jumper.
Samsung GT-I8190 Charging Ways Solution
Samsung I8190 Not Charging Problem SolutionCharging problem in Samsung galaxy S3 Mini GT-I8190 is really not a common one, but when it happens you really know that you are going to have a very bad time! Charging problem can occur due to any of the reasons, it could either be due to water damage or physical damage.
In the following lines you will get to know simple and effective troubleshooting methods to overcome Samsung GT-I8190 Charging problems.
Problems
Phone no Charging.
Auto Charging.
Showing “PC connection” error message.
Phone heats up during charging.
Manual Solution
Check with any other original Samsung charger.
Clean Charging connectors and check
Tools Required
Following are the tools you need before you plan to go with hardware method
Soldering Gun.
Heat Gun.
Multi meter.
Plastic separation tool.
Plus screw driver.
Jumper Wire (Copper wire).
Samsung S3 Mini GT-I8190 Charging Hardware Solution
OR
Check, clean or replace the charging pin connector (DC jack). clean also the PCB pads.
Check/replace the Charging connector.
Check the charging voltage (VCHARGE).
Check the below image for Charging Ways.
If any Track ways is missing just apply jumper.
Samsung GT-I8190 Charging Ways Solution
عطل UCB 8190