عملية إصلاح الإيمي ليست قانونية في بعض البلدان منها سوريا وتركيا والولايات المتحدة
يجب عليك إتباع وإحترام القوانين في بلدك وعدم تجاوزها.
الغرض من مواضيع هذا الموقع والمدونة هو إصلاح رقم الـ IMEI الموجود تحت البطارية الذي تم فقدانه بسبب التفليش الخاطىء ومشاكل السوفت وير الأخرى الناتجة عن الأخطاء البشرية
كاتب الموضوع والموقع غير مسؤول عن أي عملية مخالفة للقانون في بلدك تحت أي بند.
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZDDTHL
Phone version: J701FXXU1AQF1
PDA version: J701FXXU1AQF8
CSC version: J701FOLB1AQF6
CSC country code: THAILAND
CSC sales code: THL
HW version: MP 0.400
Phone SN: RF8J720WHNP
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20170719
IMEI: 357090052937976
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Reading data… OK
Detecting MODEM… OK
Reading MODEM… OK
Calculating… OK
Writing zTool… OK
Initialization zTool… OK
Rebooting phone… OK
Patching CERT check… done
Done with Samsung Tool PRO v.29.3
طبعا عل اوكتو زبط معي بس عل z3x مازبط
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device…
Please, allow USB debugging on phone…
Please, allow USB debugging on phone… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU1AQI1
CSC version: J701FOJV1AQI3
CSC country code: Iraq
CSC sales code: MID
HW version:
Phone SN: R28JB4545ZE
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-08-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.8
لاني ايمي نول
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZDDMID
Phone version: J701FXXU3ARA3
PDA version: J701FXXU3ARA4
CSC version: J701FOJV3ARA4
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.400
Phone SN: RF8J934A63K
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
RF cal date: 20170926
IMEI: 352812092406935
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Initialization zTool… OK
Running zTool, please wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… error (0)
Reading data… OK
Detecting MODEM… OK
Reading MODEM… OK
Calculating… OK
Writing zTool… OK
Initialization zTool… OK
Running zTool, please wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data… error (1 19)
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU2AQJ1
CSC version: J701FOJV2AQJ1
CSC country code: UAE
CSC sales code: XSG
HW version:
Phone SN: RF8J72M09SA
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-10-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.9
reset efs j700f
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU3ARA4
CSC version: J701FOJV3ARA4
CSC country code: Iraq
CSC sales code: MID
HW version:
Phone SN: RF8JA33XLDY
Chip name: EXYNOS7870
Modem board:
Security patch: 2018-01-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.9
J700F RESET EFS
Waiting ADB device… تم
قراءة معلومات الهاتف…
الطراز: SM-J701F
النسخة Android: 7.0
كود المنتج: SM-J701FZKATUR
اصدار الهاتف Phone: J701FXXU3ARA1
النسخة PDA: J701FXXU3ARA4
النسخة CSC: J701FOJV3ARA4
كود المنطقه او الدوله: TURKEY
CSC sales code: TUR
النسخة HW: MP 0.400
Phone SN: RF8JA26MX0J
إسم الرقاقة: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
تاريخ RF cal : 20171018
IMEI: 359765082242772
التحقق من Super user right… صحيح
Reading NV data… تم
فحص NV data… تم
Reading data… تم
جاري الكشف MODEM… تم
Reading MODEM… تم
جاري الحساب… تم
Writing zTool… تم
Initialization zTool… تم
Running zTool, please wait…
Start… تم
Initialization… تم
Generate and check client proof… تم
Verify proof by client… تم
Reading data… خطأ (1)
Initialization zTool… خطأ (0 1)
السلام عليكم اخي انا من سوريه ولم تعمل الشبكه
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Patch Certificate
Selected model: SM-J701F
Software version: 29.3
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZDDTHL
Phone version: J701FXXU1AQF1
PDA version: J701FXXU1AQF8
CSC version: J701FOLB1AQF6
CSC country code: THAILAND
CSC sales code: THL
HW version: MP 0.400
Phone SN: RF8J720WHNP
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2017-07-01
RF cal date: 20170719
IMEI: 357090052937976
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Reading data… OK
Detecting MODEM… OK
Reading MODEM… OK
Calculating… OK
Writing zTool… OK
Initialization zTool… OK
Rebooting phone… OK
Patching CERT check… done
Done with Samsung Tool PRO v.29.3
طبعا عل اوكتو زبط معي بس عل z3x مازبط
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Repair
Selected model: SM-J701F
Software version: 30.8
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device…
Please, allow USB debugging on phone…
Please, allow USB debugging on phone… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU1AQI1
CSC version: J701FOJV1AQI3
CSC country code: Iraq
CSC sales code: MID
HW version:
Phone SN: R28JB4545ZE
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-08-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.8
لاني ايمي نول
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Repair
Selected model: SM-J701F
Software version: 30.8
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZDDMID
Phone version: J701FXXU3ARA3
PDA version: J701FXXU3ARA4
CSC version: J701FOJV3ARA4
CSC country code: Iraq
CSC sales code: MID
HW version: MP 0.400
Phone SN: RF8J934A63K
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
RF cal date: 20170926
IMEI: 352812092406935
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Initialization zTool… OK
Running zTool, please wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data from phone… error (0)
Reading data… OK
Detecting MODEM… OK
Reading MODEM… OK
Calculating… OK
Writing zTool… OK
Initialization zTool… OK
Running zTool, please wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data… error (1 19)
Done with Samsung Tool PRO v.30.8
اخي بدك شميرا لهاي حماية
ايوا مشكور استاذ حسام
Operation: Repair
Selected model: SM-J701F
Software version: 30.9
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU2AQJ1
CSC version: J701FOJV2AQJ1
CSC country code: UAE
CSC sales code: XSG
HW version:
Phone SN: RF8J72M09SA
Chip name: EXYNOS7870
Modem board:
Security patch: 2017-10-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.9
reset efs j700f
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Repair
Selected model: SM-J701F
Software version: 30.9
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code: SM-J701FZKATUR
Phone version: J701FXXU4ARB2
PDA version: J701FXXU3ARA4
CSC version: J701FOLE4ARB2
CSC country code: INDONESIA
CSC sales code: XID
HW version: MP 0.400
Phone SN:
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
RF cal date: 20171118
IMEI: 359765083289640
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Reading data… OK
Detecting MODEM… OK
Reading MODEM… OK
Calculating… OK
Writing zTool… OK
Initialization zTool… OK
Running zTool, please wait…
Start… OK
Initialization… OK
Generate and check client proof… OK
Verify proof by client… OK
Reading data… error (1)
Initialization zTool… error (0 1)
Try downgrade modem if possible
Done with Samsung Tool PRO v.30.9
فلش هاد مودم http://support.halabtech.com/index.php?a=browse&b=file-info&id=36322
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can’t root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Repair
Selected model: SM-J701F
Software version: 30.9
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU3ARA4
CSC version: J701FOJV3ARA4
CSC country code: UAE
CSC sales code: XSG
HW version:
Phone SN:
Chip name: EXYNOS7870
Modem board:
Security patch: 2018-01-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… error
Security damaged (1)
Done with Samsung Tool PRO v.30.9
اخي حل مشكلة Null اول
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on ‘Build number’ in ‘Settings’-‘About phone’ to enable ‘Developer options’,
go to ‘Settings’-‘Developer options’ and enable ‘USB debugging’.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press ‘Repair’ button.
7. Press ‘Patch Certificate’ if you have network problem after repairing.
Operation: Repair
Selected model: SM-J701F
Software version: 30.9
If you are looking for ‘Repair Network’ function then you should use ‘Patch Certificate’
Waiting ADB device… OK
Reading phone info…
Model: SM-J701F
Android version: 7.0
Product code:
Phone version:
PDA version: J701FXXU3ARA4
CSC version: J701FOJV3ARA4
CSC country code: Iraq
CSC sales code: MID
HW version:
Phone SN: RF8JA33XLDY
Chip name: EXYNOS7870
Modem board:
Security patch: 2018-01-01
RF cal date:
IMEI:
Checking Super user right… true
Reading NV data… OK
Checking NV data… OK
Can not detected modem type
Done with Samsung Tool PRO v.30.9
J700F RESET EFS
Waiting ADB device… تم
قراءة معلومات الهاتف…
الطراز: SM-J701F
النسخة Android: 7.0
كود المنتج: SM-J701FZKATUR
اصدار الهاتف Phone: J701FXXU3ARA1
النسخة PDA: J701FXXU3ARA4
النسخة CSC: J701FOJV3ARA4
كود المنطقه او الدوله: TURKEY
CSC sales code: TUR
النسخة HW: MP 0.400
Phone SN: RF8JA26MX0J
إسم الرقاقة: EXYNOS7870
Modem board: SHANNON315
Security patch: 2018-01-01
تاريخ RF cal : 20171018
IMEI: 359765082242772
التحقق من Super user right… صحيح
Reading NV data… تم
فحص NV data… تم
Reading data… تم
جاري الكشف MODEM… تم
Reading MODEM… تم
جاري الحساب… تم
Writing zTool… تم
Initialization zTool… تم
Running zTool, please wait…
Start… تم
Initialization… تم
Generate and check client proof… تم
Verify proof by client… تم
Reading data… خطأ (1)
Initialization zTool… خطأ (0 1)
اخي حماية u3 على شميرا